AstroX

AstroX TrueXS Switch FPV Frame

$94.99
( 0 Reviews )

“Developed and manufactured in Korea with utmost attention to detail, the AstroX TrueXS Switch takes FPV frame design to an artistic, almost sophisticated level. It’s philosophy explores the powerful relationship between structural soundness and aesthetic considerations, but does not forego functionality in the process.”

The AstroX TrueX Series started with a well-rounded compact racing frame. The harshness of the racing environments earned it a revision at the design table, where the new TrueXS “Switch” version was conceived - a version with quickly replaceable arms. The opportunity was not missed to make other improvements.

The designer of the AstroX line, Boohwan Jeon, opted to use countersunk 12.9 steel screws for the top and bottom plate, giving the TrueXS an extremely streamlined appearance. The TrueXS was also the first to get the now popular “Silky” treatment, giving the finishing of the carbon pieces a luxury touch!

While it can be built with individual ESC’s on the arms of the frame, the AstroX TrueXS is best built using a stack in order to keep the center compact. The camera plates are spaced for a RunCam Swift Mini (with 0-85º tilt), but the top plate also supports the metal mounting bracket that comes with most FPV cameras. The arms have both 16x16mm and 19x19mm mounting patterns, making the frame compatible with all motors suited for 5” propellers. The frame allows for both top and bottom mounted battery.

FEATURES

  • Made by AstroX in Korea

  • High Quality Carbon Fiber

  • Silky Coating for superior finish

  • Countersunk 12.9 Steel Screws

  • Streamlined, compact design

  • 220 mm diagonal motor distance

  • Polished, luxurious aesthetics

INCLUDES

Carbon Parts (Silky Coated / tight fit screws hole)

  • 4 x 4mm arms (round edge)

  • 1 x 2.5mm Base Plate (chamferd edge / Counter sink screw hole)

  • 1 x 2mm C-reinforce plate (chamferd edge / Counter sink screw hole)

  • 1 x 2mm X-Reinforce brass plate (chamferd edge)

  • 2 x 2mm Side plate for camera

  • 1 x 1.5mm RX-VTX mount plate

Metal Parts

  • 4 x 35mm Alu6061 new Standoff

  • 8 x Alu6061 Standoff for PDB and FC

  • 1 x Set Alu6061 insert nut for X-reinforce plate

  • 1 x Set of Screws (12.9 Carbon Steel Flat Type)

PDB

  • AstroX PB type 3-5s + 2 Capacitors (5V and 12V BEC)

  • 1 x Yellow XT-60 for Direct Solder

  • 1 x set of 12AWG power cable(red, black) with Black XT-60

ETC

  • 2 x AstroX 235mm Coated Lipo Strap

  • 1 x Lipo Pad

  • 1 x TrueXS Stickers

Current stock: 0

Style *

0 Reviews

Be the first to review this product.

Add a Review