Mr Steele 2306 2345KV Silk Motor

$27.95 $21.95
You save: $6.00




Mr Steele Edition 2306 2345kv Silk Motor

“Power, but not at the expense of your battery. Torque, but without sacrifice to smoothness. Hand wound, because we're proud of our trade. White, to show off how unique this motor is. The Mr Steele motor by TBS!” - Team BlackSheep

After Drone Nationals 2015, Mr Steele began the journey of creating a custom motor to suit his needs. After a lot of back and forth with multiple motor manufacturers and testing countless prototypes, Mr Steele reached out to Raphael Pirker (Trappy) from Team BlackSheep who set up an experiment by making 40 different motors, each one with a slight difference in stator sizes, lamination thicknesses or winding material. This was done to get a better understanding on what makes a great motor great.

Most manufacturers say that “power and efficiency are two things you can’t have in the same motor”. But after 4 months of testing and many variations later, Mr Steele and Trappy were able to create a motor that not only outperformed Mr Steele’s previous favorite in terms of power, efficiency, and durability, but also felt much better in the air.

That is the purpose of Mr Steele’s Silk 2345kv Motor - not to set a record in numbers or graphs, but to give the quad the best “feel” in the air that you can possibly get. Even though it’s intended to be used as a freestyle motor, it performs excellently in racing conditions as well.


  • Kv: 2345
  • Stator diameter: 23mm
  • Stator height: 6mm
  • Weight: 28.5g
  • Color: Really white 


  • 1x TBS Mr Steele 2345kv motor
  • 4x Mounting screws M3x6.5
  • 1x Aluminum Low-Profile Prop nut
Current stock: 0

10 Reviews

nitrosomniak Aug 28th 2017

mr steele silks 2345kv motor

I've flown a lot of motors and nothing stands up to the power throughout the whole throttle curve plus efficiency amp draw and durability of this motor love it you will not be disappointed in getting this motor.

Jason hull Aug 21st 2017

Mr. Steele's Silk motors

I've had them on my 5"Alien for a few days now and straight out of the box I noticed more power in the low-mid -into the hi end, they have a bit more "pull" through out the throttle range and my flight times didn't suffer, I get about the same depending on how hard I'm flying. I have four 5" Alien' s and have been running the lumenier 2206/ 2350 kv and the new 2205/ 2400 kv . The silk mtrs are full on worth the extra money, I've had plenty of crashes and that's the reason I went with the silk mtr's the lumenier mtr's just bent too easily, tired of changing mtr's evertime i whack a limb.. these are my new go to motors , ALSO.. IF YOUR USING KISS 24A ESC'S WITH MR STEELE MOTORS YOU WILL NEED TO SOLDER THE JP1 PADS ON MOTORS #2 & #4 with red bottoms and lumenier 2206/2350kv it's motors #1 & #3 ... and the lumenier 2205/2400kv it's motors #2 & #4 (same as Mr Steele motors) .... hope this helps someone else out.. happy rippage!

Add a Review