Wraith 35A BLHeli_32 ESC v1.1

(3 reviews) Write a Review
  • Wraith 35A BLHeli_32 ESC v1.1
  • Wraith 35A BLHeli_32 ESC v1.1
  • Wraith 35A BLHeli_32 ESC v1.1
  • Wraith 35A BLHeli_32 ESC v1.1


The Wraith32 v1.1 ESC comes with BLHeli_32 firmware - the latest update to the very popular BLHeli firmware for ESC’s. It marks the 3rd generation of an already great system, which aside from bringing marginal performance improvements to our quads, also brings a lot of useful functionality to the ESC market!

BLHeli_32 makes available a range of new features, like voltage and current limiting, new DShot commands, ESC telemetry, auto timing, smoother motors, and more!

The new Wraith32 ESC’s are made by Airbot specifically to take advantage of the latest BLHeli_32 firmware. They come with a built-in current sensor, which allows for current limiting - a feature that was only available in KISS ESC’s up until now. They also have a built in RGB LED, which is programmable through the BLHeli_32 Suite! And the high 35A and 2-6S rating makes it ideal for high performance builds!

Note that you will need to download the new BLHeli_32 Suite to make changes to these ESC's. They are not compatible with the BLHeli_S Suite!


  • BLHeli_32 Firmware

  • DShot 1200 Support up to 32kHz

  • Bright RGB LED

  • Voltage and Current Limiting

  • Auto Timing Feature

  • Smoother Response

  • Extended DShot Functionality to come


  • Voltage Input: 2-6S LiPo

  • Designed for 35 A

  • Size: 15mm x 30mm x 5mm

  • Weight:

  • Version: 1.1


View AllClose

3 Reviews

  • 4
    So far so good

    Posted by Zachary.p.brasseaux on Apr 25th 2018

    I bought them for another build i have coming up but dropped an esc on another quad so i swapped these in and easy soilding job great performance with dshot 1200 and blheli 32 setup was also pretty easy the only reason its 4 instaed of 5 stars is because i only have around 10 or so flights on them so we will see how they hold up

  • 5
    Smooth as glass on Dshot 1200, rugged and reliable.

    Posted by Scott Marshall on Oct 5th 2017

    Very nice ESCs.

    A lot of attention was paid to building a robust PCB with lots of thru plating (they even plate the edges of the PCB to increase ampacity) and a solder reinforced runs for low voltage drop and heating.

    I have them on 3 Quads now, and have only lost one to a prop strike (I repaired another where a cap was torn off by another prop strike incident, and it's still going strong.) I Have a new 5" on the bench, and it's got Hypetrains on top of the arms, and Wraiths on the bottom (I AM educable, it just takes a while).

    I'm mounting these with 3M trimtape and wrapping with self-fusing silicone tape. You can cut a little square if you want to expose the 3 color LED (programmable thru BLheli) It took a while for BlHeli support to come online when I 1st started using these, but they ran great on factory firmware even then.

    I like the 35A rating, leaving some headroom for rough situations, like trees or turtle mode. (not that I often encounter such things.... ;-)

    My latest has only the best, Hypetrains, Kakute, RC Split, a scratch built frame, and of course Wraiths. Wraiths are the best MiniQuad ESC I've seen, and now RR has them at a great price.

  • 5
    Wraith 35A

    Posted by Travis B. on Jul 26th 2017

    Very smooth out of the box. Running with an F4 board, C.F. 3.2, and Dshot 1200. Love all the features. Will buy again for other builds.

View AllClose