Armattan Japalura 3" FPV Freestyle Frame

(No reviews yet) Write a Review
  • Armattan Japalura 3" FPV Freestyle Frame
  • Armattan Japalura 3" FPV Freestyle Frame
  • Armattan Japalura 3" FPV Freestyle Frame
  • Armattan Japalura 3" FPV Freestyle Frame
  • Armattan Japalura 3" FPV Freestyle Frame


As the "younger sibling" to the Chameleon, the Armattan Japalura is the fanciest micro frame around, and the second design in Armattan's selection that features aluminum protection.  Inspired by many of the same principals as the Chameleon, the Japalura is a lighter, more compact package that still supports many of today's FPV standards. This "3 inch" frame can handle full-sized miniquad guts, houses your standard HS1177 camera, and shields everything but the battery with two 4mm thick 6061 aluminum ribs.

As with any Armattan release, some of the best features of this frame are the lack of restrictions you have when building.  For example: like usual, the Japalura supports a 30.5mm center stack up to 28mm high.  In addition, the adjustable angle on the aluminum VTX mount supports a variety of transmitter options.  Another feature is the option to mount the battery on the top or the bottom of this machine, just in case you have a strong preference. Lastly, if built with an eye on the weight of all the components, you ought to be able to skate by underneath 250g.  

And that crucial Armattan warranty? The Japalura has been constructed to Armattan standards, and we believe the frame is tough enough to warrant a top-to-bottom warranty. (HAH, see what we did there?) This baby is covered from the aluminum roll bars down to the smallest of top-plates.


1x 3mm Main Plate
2x 2mm Side Plates
1x 2mm Big Top Plate
1x 2mm Small Top Plate
2x 4mm Aluminum Side Braces
1x Aluminum VTX Mount
2x M3 8mm Bolts
4x M3 12mm Bolts
20x M2 5mm Cuphead Bolts
8x M2 8mm Cuphead Bolts
4x M3 6mm Nylon M/F Standoffs
8x M3 Nylon Nuts
2x M2 Nylon Washer
1x LiPo Strap
1x Foam LiPo Pad
4x Landing Pads (2 each large/small)
1x set of Build Instructions


Frame Weight: 56g
Motor to Motor: 138mm
Frame Shape: Freestyle Bus
Bottom Plate Thickness: 3mm
Other CF Thickness: 1.5mm
Aluminum Parts: Aircraft Grade 6061
Motor Mount Pattern: 13xx
Center Stack Mount Pattern: 30.5mm or 20m
Max Center Stack Height: 28mm
Warrantied Parts: Top-to-bottom (all) 

View AllClose