Hobbywing XRotor F4 Micro Stack FC + ESC
The HobbyWing XRotor Combo, with the XRotor Flight Controller and XRotor 40a 4 in 1 ESC, is an extremely cool and clean setup. With F4 functionality and a 40a ESC, this stack is as capable and cutting edge as any possible combination of FCs and ESCs currently on the market.
- Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency. DS
- DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported
Besides the latest Dshot 150/300/600/1200 mode, the FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.
- TF-card Insertion Supported
Onboard OSD microchip allows users to easily adjust various
(OSD) parameters via the Betaflight/Cleanflight software.
- Onboard OSD Microchip
Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
- BetaFlight/Cleanflight Firmware Ready
The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.
- Perfectly integrable with the Hobbywing 4IN1 ESC & VTX
It’s easy to wire and install when pairing the FC with a Hobbywing 4-in-1 tower ESC & an HOBBYWING VTX (Video Transmitter).
30.5 x 30.5
Very easy to install, everything has a place and it's easy to plan out your install. One note... I run reverse prop rotation on my quad and the version of betaflight that came loaded on the FC was too old and didn't have that option. I had to flash it before I could get it to work the way I want it, I mean VERY old firmware.
Good product. Never used a 4 in 1, kinda worried if one of the esc’s Goes bad, you’ll have to trash the whole 4 in 1. Makes for a clean build, you get a large page of instructions but they are useless. If you are a first time builder, you’ll have to watch a lot of YouTube vids. I just don’t get the whole inverted uninverted thing. Tommy should make a in depth vid on his build, he doesn’t cover a lot of things. If he’s going to use that fc stack he should be more in depth on it. Now I’m just ranting. Overall it’s a clean stack, easy to build, but the instructions that come with it are very vague