Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)

(19 reviews) Write a Review
EZO BEARINGS!
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
  • Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)
$25.95

Description

Hypetrain Freestyle 2306 2450KV Motor (V1.1-ezo)

V1.1-ezo Improvements:

  • Stronger Bell
  • EZO Bearings
  • Stronger Shaft Screw

The Hypetrain Freestyle Motor is the first official product designed by Rotor Riot! Ride the Hype Train with the Hypetrain!

Designed from the ground up with constant input from our best pilots, the attention to detail of the Hypetrain Freestyle motor sets it apart from the competition. Inspired by the iconic Rotor Riot logo, the Hypetrain’s three-spoke 7075 aluminum bell showcases the elegant silver coated wire wound over the orange stator.

We love stylish design - but performance is the priority. That’s why we thoroughly considered every aesthetic decision, to ensure that it would not negatively impact the performance of the motor. And just to be extra sure, every motor gets individually tested before it leaves the factory! This guarantees that each motor will not only look nice, but also perform well!

As far as performance, the Hypetrain Freestyle is built around a 2306 stator, with single strand windings that give it a KV rating of about 2450 RPM per Volt. In other words, plenty of power and good efficiency! To ensure reliability, we opted to use high quality silicone wires for the motor leads.

The “open bottom” style base allows for considerable weight reduction and improved cooling, and the revolutionary 16x16 mm mounting screw pattern opens up new design possibilities while still maintaining backwards compatibility with legacy frames. Moreover, we wanted it to have a set screw to hold the bell rather than a C-clip, to facilitate motor cleaning and maintenance!

Minquad Test Bench RESULTS HERE

Real World Testing RESULTS HERE

SPECIFICATIONS

  • Kv: 2450

  • Bearings: EZO
  • Stator diameter: 23 mm

  • Stator height: 6 mm

  • Weight: 30 grams

  • Wire Length: 100 mm

  • Shaft size: M5

  • Mounting Screw Pattern: 16x16 mm

  • Input Voltage: 3-6S

INCLUDES

  • 1x Hypetrain Freestyle 2306 2450kv Motor (V1.1-ezo)

  • 1x M5 Nylock Propeller Nut

  • 4x M3 Mounting Screws

View AllClose

Additional Information

Color:
Gray
Color:
Silver
Stator Size:
2306
KV:
2450
View AllClose

19 Reviews

  • 3
    Motor

    Posted by Unknown on Jul 1st 2018

    Run great but not very durable rolled over coming in to land and nicked the ground with a prop. Props fine bearings in motor not so much

  • 5
    Awesome Motors

    Posted by Scott on Jun 18th 2018

    I have a number of different quads with different motors, but the HypeTrains always make me smile. Great power, super smooth and efficient. I have had one give way on me after a minor crash, but other than that, not a single issue...

  • 5
    Power

    Posted by Kent on Jun 14th 2018

    These motors have lots and lots on of power. Very smooth I love them and may consider a marriage proposal to them

  • 5
    Hype Train Power and Precision

    Posted by Mateo Fiuza on Jun 2nd 2018

    At low-end throttle, you have perfect control. At high-end throttle, it's going to the moon in no time! Along with that, it's incredibly efficient for the power.

  • 4
    Hypetain 2306

    Posted by Elijah on Jun 1st 2018

    Motors look and feel good, although one of them were a little tight to spin, but I backed off the bolt a bit and it was fine.

  • 5
    Hypetrain 2306-2450

    Posted by Rob on May 20th 2018

    Amazing motors! Just got a chance to maiden these and I'm impressed, super smooth, lots of power, not to mention that these look stunning. Quality motors I would recommend to anyone.

  • 5
    Hypetrain Freestyle EZO v1.1

    Posted by Unknown on Apr 25th 2018

    All the changes for the better. With how many packs I've put through these, I have had beautiful results with the EZO variation. The 2mm bell bolt was something I was thinking when I was removing the 1.5mm from the v1. overall with the new EZO bearing, the improved bell design, and bellshaft/retaining bolt to the 2mm. I love these motors, now.. I would recommend them to anyone who wants great punch, fly to the moon, and still have a battery left after a day of flying these might just be the motors for you. I would recommend pairing these motors with tekko32's or Wraith32 v2's which I'm running. Beautiful motor how ever you go about it. -Brandon

  • 5
    Hypetrain 2450kv motor

    Posted by Raul davila on Apr 19th 2018

    Absolutely amazing performance. So much like my T-motor pro 2 2400kv motors that are near and dear to my heart. I love the hypetrain pared with kiss 32amp esc. Very efficient and pleasant to look at. Top quality ezo bearings and beautiful machining. I really love the motors and rotor riot team. Costumer for life

  • 5
    Great motors

    Posted by Daniel on Apr 9th 2018

    Amazing motors. However one of them was scratched when I get em

View AllClose