Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)

(9 reviews) Write a Review
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
  • Hypetrain Le Drib 2306 2650KV Motor (V1.1-ezo)
$25.95

Description

The Hypetrain Le Drib Motor is an Official Rotor Riot product, designed with direct input from Professional Pilot "Le Drib" Drew Camden.

V1.1-ezo Improvements:

  • Stronger Bell
  • EZO Bearings
  • Stronger Shaft Screw

Designed from the ground up with constant input from Drew "Drib" Camden, the attention to detail of the Hypetrain Le Drib Motor sets it apart from the competition. Inspired by the iconic Rotor Riot logo, the Hypetrain’s three-spoke 7075 aluminum bell showcases the elegant silver coated wire wound over the orange stator. 

We love stylish design - but performance is the priority. That’s why we thoroughly considered every aesthetic decision, to ensure that it would not negatively impact the performance of the motor. And just to be extra sure, every motor gets individually tested before it leaves the factory! This guarantees that each motor will not only look nice, but also perform well!

The “open bottom” style base allows for considerable weight reduction and improved cooling, and the revolutionary 16x16 mm mounting screw pattern opens up new design possibilities while still maintaining backwards compatibility with legacy frames. Moreover, we wanted it to have a set screw to hold the bell rather than a C-clip, to facilitate motor cleaning and maintenance!

SPECIFICATIONS

  • Kv: 2650

  • Bearings: EZO
  • Stator diameter: 23 mm

  • Stator height: 6 mm

  • Weight: 30 grams

  • Wire Length: 100 mm

  • Shaft size: M5

  • Mounting Screw Pattern: 16x16 mm

  • Input Voltage: 3-6S

INCLUDES

  • 1x Hypetrain Le Drib 2306 2650kv Motor (V1.1-ezo)

  • 1x M5 Nylock Propeller Nut

  • 4x M3 Mounting Screws

View AllClose

Additional Information

Color:
Copper
Color:
Silver
Stator Size:
2306
KV:
2650
View AllClose

9 Reviews

  • 4
    LeDrib motors

    Posted by Marshall on Apr 11th 2018

    Unfortunate that the motor wires are to short for my ummagawd frame/4 in 1 escs. So I can't comment on the performance yet.

  • 4
    Ledrib hypetrains

    Posted by Mike pape on Mar 22nd 2018

    Very smooth motor durable as well, the higher kv gives that extra power to pull out of dives and power loops

  • 5
    Insane, i love it

    Posted by Zachary Huntsman on Mar 11th 2018

    Im used to cheap banggood stuff but i won an inventuon competition and got enough to makto a legit quad. I am in love with these, bye bye banggood, hello rotor riot

  • 5
    Smooth

    Posted by Bobby meyers on Mar 5th 2018

    Nice smooth linear power. Shinny rose gold is a nice touch!

  • 5
    Hypetrain Le Drib 2306 2650KV Motor

    Posted by aaron on Feb 28th 2018

    This is the best and smoothest freestyle motor with the power and punch of a racing motor when needed. Very efficient considering the 2650kv rating. I don't prefer the copper look but that don't matter when you need to punch over a tree that's bigger then expected. This is the second quad I'm gearing out with these motors. You won't be disappointed

  • 4
    hypertrain 2306 2650 kv

    Posted by Jeannot Lamothe on Feb 16th 2018

    impeccable finish
    cable can be short
    conform to image
    I will test performance later
    and still very satisfied with riot rotor products

  • 4
    Too short wires.

    Posted by Patrick Isaksen on Feb 2nd 2018

    Measured the wires to around 9.7cm. Which is too short for a 4in1 in my remix frame. Other than that they look really good.

  • 4
    GREAT MOTOR! from the best pilot ever!

    Posted by Doug on Jan 27th 2018

    Super Smooth with the right amount of torque. Flights great. One complaint, screws are too short for my Dragon Frames. 2 sizes of screws wouldn't have broken the bank

  • 4
    Nice power

    Posted by Frank Anthony Graziano on Jan 19th 2018

    The motors are powerful and smooth nice looking to got them for my remix frame and had to extend the motor wires to reach the 4 in 1. The wires were 1/8th inch to short to reach the middle pads on the esc sucks alot of extra work would be better if they had longer wires you could trim to fit.

View AllClose