Racelite LEDs for Racewire

(1 review) Write a Review
  • Racelite LEDs for Racewire
  • Racelite LEDs for Racewire


These require WhitenoiseFPV Racewire Fullsize to be used. They will not work with the Mini's. You solder them on to the racewire pads and then solder on your motor wires. You can Place them on the bottom of your arms and wire them up to the boards on top. I use 30awg wire to run to the bottom boards. You need to insulate against the carbon for anything touching the carbon. Buy 8 if would want to light up your whole quad. 

There are pads to Allow you to wire up additional Racelites to the bottom of your Arms. Use the pads labeled "1,2,3" and wire them to the same pads on the second racelite. You do not need Racewire for the Bottom Racelite boards. You must insulate the bottom of the boards though. 

View AllClose

1 Review

  • 3
    RGB would be nice...

    Posted by Kevin Venesomphone on Sep 6th 2018

    I would be a lot better if they were RGB Racelites to pair with my Hellgate LED PCB

View AllClose