Tramp HV 600mW 5.8GHz Video Transmitter

(13 reviews) Write a Review
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter
  • Tramp HV 600mW 5.8GHz Video Transmitter

Out of stock


Tramp HV 600mW 5.8GHz Video Transmitter

The all new Trampoline HV (TrampHV for short) is a tiny video transmitter with a huge set of features! At only 4 grams, it promises to solve the majority of issues and delays that race events have been experiencing.

Pit Mode: Pit mode transmits a tiny amount of power on a pre-defined frequency to allow for quad setup at a race event without disrupting the show.

Touch ’n’ Race: Transmitters are placed in Race mode upon arrival at a race event, and remain in that mode until the event is over. Race directors can, without powering up a model, define the frequency and power output of the transmitter in 5 seconds flat before a race starts. This means more practice runs, more qualifiers, and races which start and finish on-time

LapRF Compatible: LapRF uses the energy emitted by the 5.8GHz transmitter on the quadcopter to trigger a lap timer sensor.

Anti-Glitch: Anti-Glitch is a new technology which allows video transmitters to power up cleanly on their assigned channel without affecting neighboring channels.

Calibrated Power: Each and every TrampHV is factory calibrated to ensure precise power outputs, especially at the critical low-power race levels.


  • Size: 32mm x 14mm x 5mm
  • Weight: 4g (without SMA cable)
  • Input Voltage: 2s - 6s LiPo (7v - 26v)
  • Output Voltage: 5v for FPV camera
  • Power output: 1 - 600mW
  • Channels: 48 standard
  • Antenna Connector: SMA
  • Built in Thermal Protection


  • 1x ImmersionRC Tramp HV 5.8GHz Video Transmitter
  • 1x RFID Race Programmer Receiver
  • 1x RFID Race Programmer cable
  • 1x video cable with camera and power connectors
  • 1x spare transmitter cable with connector


View AllClose

13 Reviews

  • 5
    Best Bang for your Buck

    Posted by Sasquatch on Mar 14th 2018

    This transmitter is every bit as good as the unify, and its $20 cheaper. Immersion makes some great products and this is one of them. This VTx is a beast, and so easy to install. Plus if you add the smart wand you can adjust everything without the hassle of going through an OSD (if you even have OSD). Basically you can't go wrong woth this and for the price you can damn near buy two for the price of one Unify.

  • 1
    Good VTX, horrible Rotorriot support

    Posted by Maciej Zybura on Feb 12th 2018

    Well, VTX works as supposed to. It is great part. Unfortunately RotorRiot has no support at all and they are ignoring user requests and messages. If You are not famous Youtuber than You will probably will be ignored and has no support as i do. Important message regarding my placed and not shipped request was ignored and not answered till today. It was way over two weeks. I suppose that warranty or return requests looks the same. Be warned.

  • 5
    Best VTX

    Posted by Greg "The Mech" Elliott on Nov 14th 2017

    Lowest video noise of anything I have tried to date! And I have Fatshark, Imersion RC as well as some other cheaper ones. Great range, Low Vid Noise, what more do you want. I will be buying more of these!

  • 5
    Cannot wait to test lua scripts with Taranis

    Posted by Ian McBeth on Nov 5th 2017

    will keep you updated with the subject line(ease of use ETC). normally have been a TBS unify pro guy, but sometimes change it good.

  • 5
    Just awesome

    Posted by RC on Oct 2nd 2017

    With the ability to make changes via FPV this is by far the best product. It will be hard for me to use another product.

  • 5

    Posted by Franck on Sep 10th 2017

    2S-6S version is perfect for my use ;)
    Perfect with Betaflight and Taranis LUA support.
    Great product

  • 5
    Best vtx on the market

    Posted by Shawn Spears on Aug 22nd 2017

    I use this vtx on all my builds. The smart audio hookup allows you to change all the settings via remote control. Use this with an fc that has OSD and you can change all your settings in your fpv setup.

  • 5

    Posted by Gabe on Aug 5th 2017

    I love how versatile it is! I love the telemetry options so you can use your taranis to change any settings.

  • 5
    Emmersion RC VTX

    Posted by Rob Thome' on Jun 7th 2017

    I can see ! I CAN SEE !!!
    ILe it .

View AllClose